Which Video capturing software are you using?2. Have you made any changes to your computer recently?3. Which Video capturing software are you using?I installed Roxio easy VHS to DVD for Wins 7. It worked fine for a couple of days and then I got sick and didn't use the computer for two weeks.
When I tried to use Roxio after the two weeks it wouldn'twork. The Roxio software couldn't see the Roxio capture device. I uninstalled Roxio and reinstalled it over and over and it still couldn't see the capture device. No one else was using the computer during the two weeks off. I did leave the capture devise pluggedduring the two weeks. (I have tried this Roxio software & capture device on another computer and it still works fine.) I purchased ezcap usb 2.0 video capture device and the capture software with it was ArcSoft. I have the same problem, The software can'tsee the capture device.
I purchased a MSI, ATSC DIGIVOX, USB tv tuner and it had ArcSoft software with it. I have the same problem, the software can't see the (USB) tv tuner.2. Have you made any changes to your computer recently? No changes that I know of.3. What is the make and model of your computer? (Gateway) DX4860-UB21PI don't see any problems in the device manager.
Ezcap Usb Atsc Receiver Driver Download
Windows 7, drivers load but i get an error message for the usb emp audio device driver,this device cannot start (code 10).the drivers working show windows 32 bits this computer is running windows 64 bits.i just plug usb in and this automatically loads drivers.i have installed it on a vista computer and it worked fairly well still learning about the ezcapvideo to dvd options.i have tried to instal the drivers from ezcap website but what ever i do it says i have the most up to date drivers.thanks for any help. Hi Jack,You may try the following steps and check.Step 1:Uninstall all the USB entries from Device Managera.
Ezcap Usb Atsc Receiver Driver Windows 10
Click on Start and type devmgmt.msc, and then click Ok.b. Expand Universal Serial Bus controllers.Note: You might have to scroll down the list to find this item.c. Right-click the first USB controller under Universal Serial Bus controllers, and then clickUninstall to remove it.d. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers.e. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.f.
Check the USB device to see whether it is working or not.Step 2:You can also update the chipset driver to the latest by visiting the computer manufacturer’s website.You may also refer to the following article and check. For whatever it's worth to anyone. On an XP Platform am having the same problem using ArcSoft Showbiz DVD 2 with a Tevion High Speed DVD Maker USB attachment with SVHS and Composite Video Input and Left/Right RCA Phono Jack audio inputs. This all workedfine a couple weeks ago, and now can't get the audio to work.
Tried everything I can think of, hesitant to go to unknown sites and potentially download something that could come with things I don't want. Contact ARCSOFT, plan is within the next few days ArcSoftto remote connect to my XP platform and see if they can resolve.HOWEVER, in the meantime. Have a reasonable workaround; which is to use a standard 1/8' plug and connect either from my camcorder output, or earphone output, to my microphone input on my PC. Then select using Microphone from the standard audio interface/driver.However, couple points: 1. Make Sure Mic Boost is OFF in the sounds control panel, otherwise the audio is awful. If using earplug as source on the camcorder, test adjusting the output video with various levels so your camcorder is set at an optimal audiovolume for the earplug.
You may also want to experiment with Microphone Volume settings. But be sure to evaluate based on the actual video recording, and NOT what you are hearing in 'Monitor' condition as you are recording. For whatever it's worth to anyone. On an XP Platform am having the same problem using ArcSoft Showbiz DVD 2 with a Tevion High Speed DVD Maker USB attachment with SVHS and Composite Video Input and Left/Right RCA Phono Jack audio inputs. This all workedfine a couple weeks ago, and now can't get the audio to work.
Tried everything I can think of, hesitant to go to unknown sites and potentially download something that could come with things I don't want. Contact ARCSOFT, plan is within the next few days ArcSoftto remote connect to my XP platform and see if they can resolve.HOWEVER, in the meantime. Have a reasonable workaround; which is to use a standard 1/8' plug and connect either from my camcorder output, or earphone output, to my microphone input on my PC. Then select using Microphone from the standard audio interface/driver.However, couple points: 1.
Make Sure Mic Boost is OFF in the sounds control panel, otherwise the audio is awful. If using earplug as source on the camcorder, test adjusting the output video with various levels so your camcorder is set at an optimal audiovolume for the earplug. You may also want to experiment with Microphone Volume settings.